Beltronics Radar Forum

Beltronics Radar Forum (http://beltronicsradarforum.com/forums/index.php)
-   12VDC Power Supply (http://beltronicsradarforum.com/forums/forumdisplay.php?f=19)
-   -   Question: Power Supply Voltage is high (http://beltronicsradarforum.com/forums/showthread.php?t=56)

BeltronicsPro June 4th, 2009 04:07 PM

Question: Power Supply Voltage is high
 
Question: customers have called w/ questions concerning the voltage output on our P9500i/ix/GX65 download +12V power supplys' output voltage - specifically some customers have read an output in excess of +17VDC.

Answer: this voltage when read w/ NO LOAD (ie, no detector plugged into it) volt meter reading of +17V is correct - when the detectors is plugged in, the LOADED voltage will read correct in the range of +12 to 14.8 V +/- 0.5V. this is normal and the power supply is working correctly. you should also know that this power supply is designed to be used w/ ESCORT and BELTRONICS radar detectors only.

mug200 March 6th, 2017 02:08 PM

Good Thread , very useful question and good answer

flaco1801 November 9th, 2017 07:26 PM

What would be the Amperage of the output transformer? thanks...

BeltronicsPro November 10th, 2017 12:24 PM

This transformer can only output about 1A maximum


All times are GMT -4. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2012 Beltronics