Beltronics Radar Forum  

Go Back   Beltronics Radar Forum > Custom Installed Detectors > RX45

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old October 24th, 2013
BeltronicsPro's Avatar
BeltronicsPro BeltronicsPro is offline
Official Beltronics Rep
 
Join Date: Apr 2009
Posts: 1,030
Exclamation Official Beltronics Service Bulletin for late model Porsche installations

RE: Porsche (recent models of Cayenne, 911 and Panamera)

The ONLY source of power that is acceptable on recent models is located in one of the terminals on the BOTTOM row of the interior driver side fuse block. If the installer pulls off the fuse block and "untwists" the wire harness and removes some of the wrapping, they will notice that there is a black approx 12 gauge wire that runs right up the center. This is connected directly to the bottom row of terminals (usually a few are used and a couple are open). For the best connection, we recommend that the power wire is soldered directly to the back of an open terminal and then insulated as necessary. Using a fuse tap is not recommended due to the possibility of an intermittent connection.

All other 12V lines on these vehicles are run through the "Can-Bus" and are computer controlled. The voltage and current are variable and not stable for powering the Beltronics custom installed system.
__________________
Beltronics customer service is available from 9am-4pm Eastern Time Mon-Fri at 1-800-341-2288 or by live chat
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:30 AM.

Contact Us - Beltronics - Archive - 39 40 41 Terms of Service - 42 Top
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 Beltronics
Valid XHTML 1.0 Transitional Valid CSS!