Beltronics Radar Forum  

Go Back   Beltronics Radar Forum > Accessories > 12VDC Power Supply

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old June 4th, 2009
BeltronicsPro's Avatar
BeltronicsPro BeltronicsPro is offline
Official Beltronics Rep
 
Join Date: Apr 2009
Posts: 1,047
Default Question: Power Supply Voltage is high

Question: customers have called w/ questions concerning the voltage output on our P9500i/ix/GX65 download +12V power supplys' output voltage - specifically some customers have read an output in excess of +17VDC.

Answer: this voltage when read w/ NO LOAD (ie, no detector plugged into it) volt meter reading of +17V is correct - when the detectors is plugged in, the LOADED voltage will read correct in the range of +12 to 14.8 V +/- 0.5V. this is normal and the power supply is working correctly. you should also know that this power supply is designed to be used w/ ESCORT and BELTRONICS radar detectors only.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:23 AM.

Contact Us - Beltronics - Archive - 39 40 41 Terms of Service - 42 Top
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 Beltronics
Valid XHTML 1.0 Transitional Valid CSS!